- Contact Person : Mr. Chen Jack
- Company Name : Zhangjiagang Modern Beverage Packing Machinery Co., Ltd.
- Tel : 0086-512-58575307
- Fax : 0086-512-58959629
- Address : Jiangsu,zhangjiagang,Lexin south road,leyu indutrial park
- Country/Region : China
- Zip : 215600
bottle cap , flip top bottle cap , sauce flip top bottle cap
bottle cap
· New food-rate plastic material. · Dustproof, Non-spill and Security. · One-stick label,available with or without foam liner
· Easy to tear on the bottle. · The inner bottle cap opens smoothly and securely when the bottle removed from the cooler, which particles from entering bottle.· Pass the FDA. · Embossing & printing custom logo based on volume. · 192,000pcs/1x20'container,460,000pcs/ 1x40'High cube container.
The degree of tightness between 5 Gallon cap and inner cap is coordinate mooderately,when normal using,the inner cap can easily push out and the cap can easily unrip by hand after used.
Appearance conforms with these requirments:
item | standard |
product surface | product should be full,competely structure, surface and inside is smooth, without apparent shrinkage, bubble, flash and defect |
color | color equably |
pollution | no dust, no plastic scrap or other impurities, no obvious odor |
trademark | logo mode& number are full, legible |
Singel stick labels quality subjects to the follwing requirements:
item | reqirement |
printing | single stick label should have right pattern,colors and fonts, good printing quality no obvious show besmirch,no noise and no defects. |
Seal cutting | After cutting ,the single stick labels edge is smooth, no flash and silk glue. After cutting, geometry center is on the center and the deviation error less than 2mm.The label on the center of 5 Gallon caps. The deviation between label and caps center diameter error is not more than 2mm |
Heat sealing | heat sealing evenly, level off, without apparent ruffle, become warped edge, Stick label and 5 Gallon caps heat sealing are strength.when taking off label,the label area remains on the cap no more than 50mm2 and not more than three areas, the largest area does not exceed 300mm2. |
Thermal stability | A, resistance to low temperature,the label not appear warped edge,roll edge and loose. B. resistance to high-temperature,the label not appear warped edge,roll edge and loose. |
bottle cap , flip top bottle cap , sauce flip top bottle cap